Filters
Close

APC by Schneider Electric NetShelter 42-Outlets PDU

APC by Schneider Electric NetShelter 42-Outlets PDU - Switched - IEC 60309 60A (3P+PE) - 21 x IEC 60320 C13/C15/C19/C21, 21 x IEC 60320 C13/C15 - 230 V AC - Network (RJ-45) - 0U - Rack
SKU: 1000194779
Manufacturer part number: APDU10450SW
Free shipping
Manufacturer: APC
Old price: $5,515.00
$3,898.88
Picture of APC by Schneider Electric NetShelter 42-Outlets PDU

APC NetShelter Rack PDU Advanced provide reliable power distribution to IT Equipment within server and/or networking racks. PDU level power metering via remote access and local display for power visibility and notification of potential overload. 4-in-1 combination outlets which can be used as either C13, C19, C15, or C21 outlets provide unparreled deployment flexibility. Maximum outlet density with 42 outlets in a 2.2" wide form factor. Outlets on the PDUs are color coded and/or labeled by breaker and input phase on 3 phase models to simplify deployment. Provides an alternating phase design whereby each of the 3 phases are organized into small outlet groups which alternate from top to bottom of the PDU to facilitate better power cord management and promote better load balancing. Power Sharing allows PDUs cascaded together via 2 ethernet ports enable an Network Management Card to continue functioning in the event of an AC power loss. No interruption in Network communication, sensors operation, and alarm traps. Live Swap Network Management Card (NMC) which can be replaced without powering down the PDU or connected devices to minimize downtime in the unlikely event of an NMC power event. Rated and approved to operate up to 60C (140F) at full load ensures reliability and availability even in today's high density deployments. Gigabit ethernet to enhance and standardize network connectivity across all assets in the data center. A second ethernet port (10/100) is available to allow cascading to other PDUs, connect to a 2nd private network, or provide network redundancy. 1% metering accuracy for the peace of mind to use NetShelter Rack PDU Advanced to bill based on power usage. In addition, the higher level of accuracy ensures the most precise measures for capacity planning and threshold alarm monitoring. Two environmental sensor ports allow for optional sensors (sold separately) to be connected. For data center deployments across multiple regions, these PDUs are both UL and CE rated providing one PDU that can be used globally to simplify and standardize deployment.

Product Information

Transource eSKU1072294038
ManufacturerSchneider Electric SA
Manufacturer Part NumberAPDU10450SW
Manufacturer Website Addresshttp://www.schneider-electric.com
Brand NameAPC by Schneider Electric
Product LineNetShelter
Product NameNetShelter 42-Outlets PDU
Product TypePDU

Product Specifications

General Information
ManufacturerSchneider Electric SA
Manufacturer Part NumberAPDU10450SW
Manufacturer Website Addresshttp://www.schneider-electric.com
Brand NameAPC by Schneider Electric
Product LineNetShelter
Product NameNetShelter 42-Outlets PDU
Marketing Information

APC NetShelter Rack PDU Advanced provide reliable power distribution to IT Equipment within server and/or networking racks. PDU level power metering via remote access and local display for power visibility and notification of potential overload. 4-in-1 combination outlets which can be used as either C13, C19, C15, or C21 outlets provide unparreled deployment flexibility. Maximum outlet density with 42 outlets in a 2.2" wide form factor. Outlets on the PDUs are color coded and/or labeled by breaker and input phase on 3 phase models to simplify deployment. Provides an alternating phase design whereby each of the 3 phases are organized into small outlet groups which alternate from top to bottom of the PDU to facilitate better power cord management and promote better load balancing. Power Sharing allows PDUs cascaded together via 2 ethernet ports enable an Network Management Card to continue functioning in the event of an AC power loss. No interruption in Network communication, sensors operation, and alarm traps. Live Swap Network Management Card (NMC) which can be replaced without powering down the PDU or connected devices to minimize downtime in the unlikely event of an NMC power event. Rated and approved to operate up to 60C (140F) at full load ensures reliability and availability even in today's high density deployments. Gigabit ethernet to enhance and standardize network connectivity across all assets in the data center. A second ethernet port (10/100) is available to allow cascading to other PDUs, connect to a 2nd private network, or provide network redundancy. 1% metering accuracy for the peace of mind to use NetShelter Rack PDU Advanced to bill based on power usage. In addition, the higher level of accuracy ensures the most precise measures for capacity planning and threshold alarm monitoring. Two environmental sensor ports allow for optional sensors (sold separately) to be connected. For data center deployments across multiple regions, these PDUs are both UL and CE rated providing one PDU that can be used globally to simplify and standardize deployment.

Product TypePDU
Technical Information
PDU TypeSwitched
PhaseSingle Phase
Plug/Connector TypeIEC 60309 60A (3P+PE)
Receptacle TypeIEC 60320 C13/C15/C19/C21
Receptacle TypeIEC 60320 C13/C15
Receptacle Detail21 x IEC 60320 C13/C15/C19/C21
Receptacle Detail21 x IEC 60320 C13/C15
Protection TypeOverload Protection
Power Description
Input Voltage230 V AC
Input Voltage Range200 V AC - 240 V AC
Input Voltage Range346 V AC - 415 V AC
Output Voltage208 V AC
Power Rating (VA)36.40 kVA
Power Rating (Watt)36.40 kW
Input Current48 A
Interfaces/Ports
Network (RJ-45)Yes
Physical Characteristics
Product ColorBlack
Form FactorRack
Rack Height0U
Height71.9"
Width2.2"
Depth3"
Weight (Approximate)27.34 lb
Miscellaneous
Environmentally FriendlyYes
Environmental CertificationRoHS
Warranty
Limited Warranty3 Year

APC NetShelter Rack PDU Advanced provide reliable power distribution to IT Equipment within server and/or networking racks. PDU level power metering via remote access and local display for power visibility and notification of potential overload. 4-in-1 combination outlets which can be used as either C13, C19, C15, or C21 outlets provide unparreled deployment flexibility. Maximum outlet density with 42 outlets in a 2.2" wide form factor. Outlets on the PDUs are color coded and/or labeled by breaker and input phase on 3 phase models to simplify deployment. Provides an alternating phase design whereby each of the 3 phases are organized into small outlet groups which alternate from top to bottom of the PDU to facilitate better power cord management and promote better load balancing. Power Sharing allows PDUs cascaded together via 2 ethernet ports enable an Network Management Card to continue functioning in the event of an AC power loss. No interruption in Network communication, sensors operation, and alarm traps. Live Swap Network Management Card (NMC) which can be replaced without powering down the PDU or connected devices to minimize downtime in the unlikely event of an NMC power event. Rated and approved to operate up to 60C (140F) at full load ensures reliability and availability even in today's high density deployments. Gigabit ethernet to enhance and standardize network connectivity across all assets in the data center. A second ethernet port (10/100) is available to allow cascading to other PDUs, connect to a 2nd private network, or provide network redundancy. 1% metering accuracy for the peace of mind to use NetShelter Rack PDU Advanced to bill based on power usage. In addition, the higher level of accuracy ensures the most precise measures for capacity planning and threshold alarm monitoring. Two environmental sensor ports allow for optional sensors (sold separately) to be connected. For data center deployments across multiple regions, these PDUs are both UL and CE rated providing one PDU that can be used globally to simplify and standardize deployment.

Product Information

Transource eSKU1072294038
ManufacturerSchneider Electric SA
Manufacturer Part NumberAPDU10450SW
Manufacturer Website Addresshttp://www.schneider-electric.com
Brand NameAPC by Schneider Electric
Product LineNetShelter
Product NameNetShelter 42-Outlets PDU
Product TypePDU

Product Specifications

General Information
ManufacturerSchneider Electric SA
Manufacturer Part NumberAPDU10450SW
Manufacturer Website Addresshttp://www.schneider-electric.com
Brand NameAPC by Schneider Electric
Product LineNetShelter
Product NameNetShelter 42-Outlets PDU
Marketing Information

APC NetShelter Rack PDU Advanced provide reliable power distribution to IT Equipment within server and/or networking racks. PDU level power metering via remote access and local display for power visibility and notification of potential overload. 4-in-1 combination outlets which can be used as either C13, C19, C15, or C21 outlets provide unparreled deployment flexibility. Maximum outlet density with 42 outlets in a 2.2" wide form factor. Outlets on the PDUs are color coded and/or labeled by breaker and input phase on 3 phase models to simplify deployment. Provides an alternating phase design whereby each of the 3 phases are organized into small outlet groups which alternate from top to bottom of the PDU to facilitate better power cord management and promote better load balancing. Power Sharing allows PDUs cascaded together via 2 ethernet ports enable an Network Management Card to continue functioning in the event of an AC power loss. No interruption in Network communication, sensors operation, and alarm traps. Live Swap Network Management Card (NMC) which can be replaced without powering down the PDU or connected devices to minimize downtime in the unlikely event of an NMC power event. Rated and approved to operate up to 60C (140F) at full load ensures reliability and availability even in today's high density deployments. Gigabit ethernet to enhance and standardize network connectivity across all assets in the data center. A second ethernet port (10/100) is available to allow cascading to other PDUs, connect to a 2nd private network, or provide network redundancy. 1% metering accuracy for the peace of mind to use NetShelter Rack PDU Advanced to bill based on power usage. In addition, the higher level of accuracy ensures the most precise measures for capacity planning and threshold alarm monitoring. Two environmental sensor ports allow for optional sensors (sold separately) to be connected. For data center deployments across multiple regions, these PDUs are both UL and CE rated providing one PDU that can be used globally to simplify and standardize deployment.

Product TypePDU
Technical Information
PDU TypeSwitched
PhaseSingle Phase
Plug/Connector TypeIEC 60309 60A (3P+PE)
Receptacle TypeIEC 60320 C13/C15/C19/C21
Receptacle TypeIEC 60320 C13/C15
Receptacle Detail21 x IEC 60320 C13/C15/C19/C21
Receptacle Detail21 x IEC 60320 C13/C15
Protection TypeOverload Protection
Power Description
Input Voltage230 V AC
Input Voltage Range200 V AC - 240 V AC
Input Voltage Range346 V AC - 415 V AC
Output Voltage208 V AC
Power Rating (VA)36.40 kVA
Power Rating (Watt)36.40 kW
Input Current48 A
Interfaces/Ports
Network (RJ-45)Yes
Physical Characteristics
Product ColorBlack
Form FactorRack
Rack Height0U
Height71.9"
Width2.2"
Depth3"
Weight (Approximate)27.34 lb
Miscellaneous
Environmentally FriendlyYes
Environmental CertificationRoHS
Warranty
Limited Warranty3 Year