Filters
Close

Tripp Lite Cat6a Snagless Shielded STP Network Patch Cable 10G Certified, PoE, Gray RJ45 M/M 3ft 3'

Tripp Lite Cat6a Snagless Shielded STP Network Patch Cable 10G Certified, PoE, Gray RJ45 M/M 3ft 3' - Category 6a for Network Device, Switch, Modem, Router, Hub, Patch Panel, VoIP Device, Camera - 1.25 GB/s - Patch Cable - 3 ft - 1 x RJ-45 Male Network - 1 x RJ-45 Male Network - Shielding - Gray
SKU: 1000177266
Manufacturer part number: N262-003-GY
Free shipping
Manufacturer: Tripp Lite
Old price: $16.97
$6.19
Picture of Tripp Lite Cat6a Snagless Shielded STP Network Patch Cable 10G Certified, PoE, Gray RJ45 M/M 3ft 3'
The N262-003-GY Cat6a 10G-Certified Snagless Shielded STP Network Patch Cable (RJ45 M/M) is recommended for transmitting 10 Gbps data, voice and video through high-speed 10G equipment, including network switches, modems, routers, adapters, hubs and patch panels. It also connects PoE devices, such as VoIP phones, security cameras and point-of-sale kiosks.

Designed for fast transmission and excellent signal quality, this three-foot gray cable ensures peak performance throughout your local area network (LAN). It reduces impedance and structural return loss compared to standard 100 MHz wire. Premium shielding protects your Ethernet network from disruptive EMI/RFI line noise that can distort or destroy data.

Manufactured from 26 AWG copper wire and protected by a rugged PVC jacket, the four-pair stranded N262-003-GY minimizes near-end crosstalk (NeXT) levels. The RJ45 connectors' snagless design protects the locking tabs from being damaged or broken off during installation. Integral strain relief with ridges on each end gives the cable extra flexibility, reduces stress, and helps the cable and connectors move freely without cracking.

Each N262-003-GY cable has been tested and certified using Fluke test equipment. The test results are available upon request. It supports IEEE 802.3af, is DTE power compliant, is ETL/UL certified, and is compatible with T568A/T568B wiring.

Product Information

Transource eSKU1040603929
ManufacturerTripp Lite by Eaton
Manufacturer Part NumberN262-003-GY
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product ModelN262-003-GY
Product NameN262-003-GY Cat.6a STP Patch Network Cable
Product TypeNetwork Cable

Product Specifications

General Information
ManufacturerTripp Lite by Eaton
Manufacturer Part NumberN262-003-GY
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product ModelN262-003-GY
Product NameN262-003-GY Cat.6a STP Patch Network Cable
Marketing InformationThe N262-003-GY Cat6a 10G-Certified Snagless Shielded STP Network Patch Cable (RJ45 M/M) is recommended for transmitting 10 Gbps data, voice and video through high-speed 10G equipment, including network switches, modems, routers, adapters, hubs and patch panels. It also connects PoE devices, such as VoIP phones, security cameras and point-of-sale kiosks.

Designed for fast transmission and excellent signal quality, this three-foot gray cable ensures peak performance throughout your local area network (LAN). It reduces impedance and structural return loss compared to standard 100 MHz wire. Premium shielding protects your Ethernet network from disruptive EMI/RFI line noise that can distort or destroy data.

Manufactured from 26 AWG copper wire and protected by a rugged PVC jacket, the four-pair stranded N262-003-GY minimizes near-end crosstalk (NeXT) levels. The RJ45 connectors' snagless design protects the locking tabs from being damaged or broken off during installation. Integral strain relief with ridges on each end gives the cable extra flexibility, reduces stress, and helps the cable and connectors move freely without cracking.

Each N262-003-GY cable has been tested and certified using Fluke test equipment. The test results are available upon request. It supports IEEE 802.3af, is DTE power compliant, is ETL/UL certified, and is compatible with T568A/T568B wiring.
Product TypeNetwork Cable
Technical Information
Cable TypeCategory 6a
Cable CharacteristicPatch Cable
Cable Length3 ft
Connector on First End1 x RJ-45 Male Network
Connector on Second End1 x RJ-45 Male Network
FeaturesSnagless
FeaturesPoE
FeaturesEMI/RF Protection
FeaturesStranded
FeaturesStrain Relief
FeaturesFlexible
FeaturesMolded
FeaturesBooted
FeaturesCrosstalk Protection
ShieldingYes
Device SupportedNetwork Device
Device SupportedSwitch
Device SupportedModem
Device SupportedRouter
Device SupportedHub
Device SupportedPatch Panel
Device SupportedVoIP Device
Device SupportedCamera
American Wire Gauge26 AWG
Data Transfer Rate10 Gbit/s
Physical Characteristics
ColorGray
Miscellaneous
Environmentally FriendlyYes
Environmental CertificationRoHS
Country of OriginChina
Warranty
Limited WarrantyLifetime
The N262-003-GY Cat6a 10G-Certified Snagless Shielded STP Network Patch Cable (RJ45 M/M) is recommended for transmitting 10 Gbps data, voice and video through high-speed 10G equipment, including network switches, modems, routers, adapters, hubs and patch panels. It also connects PoE devices, such as VoIP phones, security cameras and point-of-sale kiosks.

Designed for fast transmission and excellent signal quality, this three-foot gray cable ensures peak performance throughout your local area network (LAN). It reduces impedance and structural return loss compared to standard 100 MHz wire. Premium shielding protects your Ethernet network from disruptive EMI/RFI line noise that can distort or destroy data.

Manufactured from 26 AWG copper wire and protected by a rugged PVC jacket, the four-pair stranded N262-003-GY minimizes near-end crosstalk (NeXT) levels. The RJ45 connectors' snagless design protects the locking tabs from being damaged or broken off during installation. Integral strain relief with ridges on each end gives the cable extra flexibility, reduces stress, and helps the cable and connectors move freely without cracking.

Each N262-003-GY cable has been tested and certified using Fluke test equipment. The test results are available upon request. It supports IEEE 802.3af, is DTE power compliant, is ETL/UL certified, and is compatible with T568A/T568B wiring.

Product Information

Transource eSKU1040603929
ManufacturerTripp Lite by Eaton
Manufacturer Part NumberN262-003-GY
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product ModelN262-003-GY
Product NameN262-003-GY Cat.6a STP Patch Network Cable
Product TypeNetwork Cable

Product Specifications

General Information
ManufacturerTripp Lite by Eaton
Manufacturer Part NumberN262-003-GY
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product ModelN262-003-GY
Product NameN262-003-GY Cat.6a STP Patch Network Cable
Marketing InformationThe N262-003-GY Cat6a 10G-Certified Snagless Shielded STP Network Patch Cable (RJ45 M/M) is recommended for transmitting 10 Gbps data, voice and video through high-speed 10G equipment, including network switches, modems, routers, adapters, hubs and patch panels. It also connects PoE devices, such as VoIP phones, security cameras and point-of-sale kiosks.

Designed for fast transmission and excellent signal quality, this three-foot gray cable ensures peak performance throughout your local area network (LAN). It reduces impedance and structural return loss compared to standard 100 MHz wire. Premium shielding protects your Ethernet network from disruptive EMI/RFI line noise that can distort or destroy data.

Manufactured from 26 AWG copper wire and protected by a rugged PVC jacket, the four-pair stranded N262-003-GY minimizes near-end crosstalk (NeXT) levels. The RJ45 connectors' snagless design protects the locking tabs from being damaged or broken off during installation. Integral strain relief with ridges on each end gives the cable extra flexibility, reduces stress, and helps the cable and connectors move freely without cracking.

Each N262-003-GY cable has been tested and certified using Fluke test equipment. The test results are available upon request. It supports IEEE 802.3af, is DTE power compliant, is ETL/UL certified, and is compatible with T568A/T568B wiring.
Product TypeNetwork Cable
Technical Information
Cable TypeCategory 6a
Cable CharacteristicPatch Cable
Cable Length3 ft
Connector on First End1 x RJ-45 Male Network
Connector on Second End1 x RJ-45 Male Network
FeaturesSnagless
FeaturesPoE
FeaturesEMI/RF Protection
FeaturesStranded
FeaturesStrain Relief
FeaturesFlexible
FeaturesMolded
FeaturesBooted
FeaturesCrosstalk Protection
ShieldingYes
Device SupportedNetwork Device
Device SupportedSwitch
Device SupportedModem
Device SupportedRouter
Device SupportedHub
Device SupportedPatch Panel
Device SupportedVoIP Device
Device SupportedCamera
American Wire Gauge26 AWG
Data Transfer Rate10 Gbit/s
Physical Characteristics
ColorGray
Miscellaneous
Environmentally FriendlyYes
Environmental CertificationRoHS
Country of OriginChina
Warranty
Limited WarrantyLifetime