Filters
Close

Tripp Lite HDMI over Cat5/Cat6 Active Video Extender Transmitter Receiver 1080p

Tripp Lite HDMI over Cat5/Cat6 Active Video Extender Transmitter Receiver 1080p - 1 Input Device - 1 Output Device - 125 ft Range - 2 x Network (RJ-45) - 2 x USB - 1 x HDMI In - 1 x HDMI Out - Full HD - 1920 x 1080 - Twisted Pair - Category 6 - TAA Compliant
SKU: 1000268482
Manufacturer part number: B126-1A1-U
Free shipping
Manufacturer: Tripp Lite
Old price: $259.20
$163.14
Picture of Tripp Lite HDMI over Cat5/Cat6 Active Video Extender Transmitter Receiver 1080p

The B126-1A1-U HDMI over Cat5/Cat6 Active Extender Kit includes a transmitter unit and a receiver unit that work in tandem to extend an HDMI audio/video signal to an HDMI projector, monitor or television. The kit is ideal for digital signs, trade shows, presentations, classrooms, churches, retail settings and other applications where the video source is located farther than conventional cables allow.

The transmitter's built-in HDMI cable connects to the audio/video source, and the receiver's built-in HDMI cable connects to the display. Cat5e/6 cable connects the two units (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N202-Series). Each unit is powered by an included USB Micro-B to USB-A cable, which must be connected between the unit and a USB port on the source device, display or USB wall charger. You can also connect an optional HDMI monitor to the transmitter's local port with a user-supplied HDMI cable, such as Tripp Lite's P568-Series.

The B126-1A1-U can extend a 1080p (@ 60 Hz) signal up to 125 feet with full, rich stereo. Built-in RJ45 LEDs indicate the units are receiving power and a signal from the source. Built-in equalization control lets you fine-tune the image quality at each remote display. Easy to set up with no software or drivers to install. Works with all operating systems and HDMI sources.

Features

Extends HDMI Audio/Video Signals to an HDMI Display

  • Extends a 1080p (@ 60 Hz) signal up to 125 ft.
  • Ideal for digital signs, trade shows, presentations, classrooms, churches and retail settings
  • Transmitter and receiver connect with one Cat5e/6 cable (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N202-Series)
  • Supports stereo audio and HDCP
  • Built-in equalization control lets you adjust the image on the remote display

Easy to Set Up and Use

  • Plug-and-play engineering-no software, drivers or external power supply
  • Powered via included USB cables
  • Units connect quickly to source and display with built-in HDMI cables
  • Optional local HDMI monitor connects to transmitter with user-supplied HDMI cable
  • LEDs indicate when units are receiving power and a signal from the source
  • Works with all operating systems and HDMI sources

TAA-Compliant

  • Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

System Requirements

  • Computer, Blu-ray™ player or other source with HDMI port
  • Display with HDMI port

Product Information

Transource eSKU1032927255
ManufacturerTripp Lite by Eaton
Manufacturer Part NumberB126-1A1-U
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product ModelB126-1A1-U
Product NameHDMI over Cat5/Cat6 Active Extender Kit, 1080p @ 60 Hz, USB Powered
Product TypeVideo Extender Transmitter/Receiver

Specifications

Technical Information
Connectivity TechnologyWired
Number of Input Devices Supported1
Number of Output Devices Supported1
Maximum Operating Distance125 ft
Video
Graphics ModesFull HD
Maximum Video Resolution1920 x 1080
Interfaces/Ports
Network (RJ-45)Yes
HDMI InYes
HDMI OutYes
USBYes
Number of Network (RJ-45) Ports2
Number of USB Ports2
Number of HDMI Inputs1
Number of HDMI Outputs1
Media & Performance
Media Type SupportedTwisted Pair
Twisted Pair Cable StandardCategory 6
Miscellaneous
Package Contents
  • Transmitter Unit
  • Receiver Unit
  • 2 x USB Micro-B to USB-A Cables, 3 ft.
  • Screwdriver for Adjusting Equalization
  • Owner's Manual
Environmentally FriendlyYes
Environmental CertificationRoHS
Country of OriginTaiwan
TAA CompliantYes
Warranty
Limited Warranty1 Year

The B126-1A1-U HDMI over Cat5/Cat6 Active Extender Kit includes a transmitter unit and a receiver unit that work in tandem to extend an HDMI audio/video signal to an HDMI projector, monitor or television. The kit is ideal for digital signs, trade shows, presentations, classrooms, churches, retail settings and other applications where the video source is located farther than conventional cables allow.

The transmitter's built-in HDMI cable connects to the audio/video source, and the receiver's built-in HDMI cable connects to the display. Cat5e/6 cable connects the two units (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N202-Series). Each unit is powered by an included USB Micro-B to USB-A cable, which must be connected between the unit and a USB port on the source device, display or USB wall charger. You can also connect an optional HDMI monitor to the transmitter's local port with a user-supplied HDMI cable, such as Tripp Lite's P568-Series.

The B126-1A1-U can extend a 1080p (@ 60 Hz) signal up to 125 feet with full, rich stereo. Built-in RJ45 LEDs indicate the units are receiving power and a signal from the source. Built-in equalization control lets you fine-tune the image quality at each remote display. Easy to set up with no software or drivers to install. Works with all operating systems and HDMI sources.

Features

Extends HDMI Audio/Video Signals to an HDMI Display

  • Extends a 1080p (@ 60 Hz) signal up to 125 ft.
  • Ideal for digital signs, trade shows, presentations, classrooms, churches and retail settings
  • Transmitter and receiver connect with one Cat5e/6 cable (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N202-Series)
  • Supports stereo audio and HDCP
  • Built-in equalization control lets you adjust the image on the remote display

Easy to Set Up and Use

  • Plug-and-play engineering-no software, drivers or external power supply
  • Powered via included USB cables
  • Units connect quickly to source and display with built-in HDMI cables
  • Optional local HDMI monitor connects to transmitter with user-supplied HDMI cable
  • LEDs indicate when units are receiving power and a signal from the source
  • Works with all operating systems and HDMI sources

TAA-Compliant

  • Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

System Requirements

  • Computer, Blu-ray™ player or other source with HDMI port
  • Display with HDMI port

Product Information

Transource eSKU1032927255
ManufacturerTripp Lite by Eaton
Manufacturer Part NumberB126-1A1-U
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product ModelB126-1A1-U
Product NameHDMI over Cat5/Cat6 Active Extender Kit, 1080p @ 60 Hz, USB Powered
Product TypeVideo Extender Transmitter/Receiver

Specifications

Technical Information
Connectivity TechnologyWired
Number of Input Devices Supported1
Number of Output Devices Supported1
Maximum Operating Distance125 ft
Video
Graphics ModesFull HD
Maximum Video Resolution1920 x 1080
Interfaces/Ports
Network (RJ-45)Yes
HDMI InYes
HDMI OutYes
USBYes
Number of Network (RJ-45) Ports2
Number of USB Ports2
Number of HDMI Inputs1
Number of HDMI Outputs1
Media & Performance
Media Type SupportedTwisted Pair
Twisted Pair Cable StandardCategory 6
Miscellaneous
Package Contents
  • Transmitter Unit
  • Receiver Unit
  • 2 x USB Micro-B to USB-A Cables, 3 ft.
  • Screwdriver for Adjusting Equalization
  • Owner's Manual
Environmentally FriendlyYes
Environmental CertificationRoHS
Country of OriginTaiwan
TAA CompliantYes
Warranty
Limited Warranty1 Year