Features | Customize a Network Extension over Fiber Optic Cable
This network media converter works with a variety of SFP transceivers to convert a copper Gigabit Ethernet signal to fiber optic and extend it to a second network device. The customizable SFP port supports both singlemode and multimode transceivers, allowing your network connection to reach hubs, switches and other devices located farther away than copper cabling's 100-meter limit. Auto-negotiation and automatic MDI/MDI-X configuration seamlessly connect devices without crossover cabling.
Monitor Your Installation with Link Fault Signaling and Loop Back Functions
Determine the health of your network connection via the Link Fault Signaling (LFS) and Loop Back functions. The LFS LED indicates when a copper or fiber cable has been severed or another cause of disruption in service has occurred. The Local Loop Back (LLB) and Remote Loop Back (RLB) functions ensure copper and fiber cables have been correctly installed. Use the DIP switches to control each function or turn them on or off.
LEDs Indicate Installation Performance and Diagnostic Functions
Easy-to-read LEDs on the side of the unit indicate essential status information, including network speed and connection, LFS diagnostics and unit power.
Protective Metal Housing Built to Withstand a Variety of Hazards
The hardened aluminum case is designed to operate in extreme temperatures ranging from -10 to 60 degrees Celsius (14 to 140 degrees Fahrenheit). It is protected from electrostatic discharge (ESD), radio frequency interference (RFI) and power surges. Hardware is included for wall or DIN mounting.
Works in Tandem with Tripp Lite's N785-CH12 Chassis
House and power up to 12 Tripp Lite media converters, including the N785-H01-SFP, using the N785-CH12 12-port chassis (sold separately) to create an organized installation.
TAA-Compliant for GSA Schedule Purchases
The N785-H01-SFP is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
Product Information |
|
| Transource eSKU |
1000335650 |
| Manufacturer |
Tripp Lite by Eaton |
| Manufacturer Part Number |
N785-H01-SFP |
| Manufacturer Website Address |
https://tripplite.eaton.com/ |
| Brand Name |
Tripp Lite by Eaton |
| Product Model |
N785-H01-SFP |
| Product Name |
N785-H01-SFP Transceiver/Media Converter |
| Product Type |
Transceiver/Media Converter |
Technical Specifications |
|
Interfaces/Ports |
| Total Number of Ports |
1 |
| Network (RJ-45) |
Yes |
| Number of Network (RJ-45) Ports |
1 |
Media & Performance |
| Media Type Supported |
Twisted Pair |
| Media Type Supported |
Optical Fiber |
| Fiber Mode Supported |
Multi-mode |
| Fiber Mode Supported |
Single-mode |
| Maximum Distance Supported |
0.10 km |
I/O Expansions |
| Total Number of Expansion Slots |
1.0 |
| Expansion Slot Type |
SFP (mini-GBIC) |
| Number of SFP Slots |
1 |
Network & Communication |
| Ethernet Technology |
Gigabit Ethernet |
| Network Technology |
10/100/1000Base-T |
| Network Technology |
100/1000Base-X |
Power Description |
| Power Source |
AC Adapter |
| Power Consumption |
1.80 W |
| Plug/Connector Type |
NEMA 5-15P |
Physical Characteristics |
| Form Factor |
DIN Rail Mountable |
| Form Factor |
Wall Mountable |
| Form Factor |
Desktop |
| Height |
0.9" |
| Width |
2.9" |
| Depth |
4.3" |
| Weight (Approximate) |
8.43 oz |
Miscellaneous |
| Package Contents |
- N785-H01-SFP Transceiver/Media Converter
- L-shaped Bracket
- Rubber Foot
- SFP Connector Cap
- External Power Supply with NEMA 1-15P Plug
- DIN Rail Kit
- Wall-mounting Hardware
- Quick Start Guide
|
| Environmentally Friendly |
Yes |
| Environmental Compliance |
Restriction of Hazardous Substances (RoHS) |
| Country of Origin |
Taiwan |
| TAA Compliant |
Yes |
Warranty |
| Limited Warranty |
2 Year |
