Filters
Close

Tripp Lite UPS Smart 1000VA 800W Rackmount AVR 120V Preinstalled WEBCARDLX Pure Sine Wave USB DB9 SNMP 1URM

Tripp Lite UPS Smart 1000VA 800W Rackmount AVR 120V Preinstalled WEBCARDLX Pure Sine Wave USB DB9 SNMP 1URM - 1000 VA/800 W - 120 V AC - 4 Minute Stand-by Time - 1U Rack-mountable - 6 x NEMA 5-15R
SKU: 1000176978
Manufacturer part number: SMART1000RM1UN
Free shipping
Manufacturer: Tripp Lite
Old price: $1,832.98
$1,170.98
Picture of Tripp Lite UPS Smart 1000VA 800W Rackmount AVR 120V Preinstalled WEBCARDLX Pure Sine Wave USB DB9 SNMP 1URM
Protects Mission-Critical Rack-Mounted Equipment
  • Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
  • Audible alarm signals loss of utility power, overload and low battery
  • 6 NEMA 5-15R outlets
  • 10-ft. (3.05 m) power cord with 120V NEMA 5-15P input
  • 450-joule surge suppression rating
Reliable Battery Backup
  • Supports half load up to 14 min. and full load up to 4 min.
  • Internal batteries designed for hot-swap field replacement
Pre-Installed WEBCARDLX Network Interface
  • Allows full remote access for power monitoring, configuration, control and email notifications via secure web browser, SNMP, Telnet, SSH, and CLI.
  • Optional E2 sensors (sold separately) enable site monitoring of temperature, humidity and contact-closure status
Reduce Service Calls with Auto Probe Autonomous Device Management
  • Auto Probe feature (Firmware 15.5.2 and greater) of the LX Platform Interface checks the connectivity status of any networked device and automatically takes one or more user-configured actions if the device fails to respond; actions include outlet reboot, set SNMP traps, SNMP OID sets, and even script execution when used in conjunction with the Tripp Lite PowerAlert Network Shutdown Agent (PANSA)
Switchable Outlets
  • 2 load banks, each with one outlet controllable remotely to reboot equipment or shed nonessential loads
Automatic Voltage Regulation (AVR)
  • Maintains 120V nominal output over input range of 83V-147V without using battery power
EMI/RFI Line Noise Filtering
  • Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance
LED Indicators
  • Front-panel LEDs signal power, voltage correction, load level and battery charge state
Communications Ports
  • USB and DB9 ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software (available via free download at <li" class="redactor-autoparser-object">www.tripplite.com/poweralert)<... style="box-sizing: border-box; --pr-shadow:0 0 transparent; --pr-ring-inset:var(--pr-empty, ); --pr-ring-offset-width:0px; --pr-ring-offset-color:#fff; --pr-ring-color:rgba(59,130,246,0.5); --pr-ring-offset-shadow:0 0 transparent; --pr-ring-shadow:0 0 transparent; margin-bottom: 7px; break-inside: avoid; font-size: 0.85rem;">EPO port supports emergency shutdown in large facilities
Versatile Installation Options
  • Hardware included for mounting in 1U of EIA-standard 19 in. 2- or 4-post rack
  • Optional 4POSTRAILKIT1U accessory available for extra support in 4-post installations
  • Compatible with vertical mount cabinets

Product Information

Transource eSKU1030217184
ManufacturerTripp Lite by Eaton
Manufacturer Part NumberSMART1000RM1UN
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product LineSmartPro
Product ModelSMART1000RM1UN
Product NameSmartPro SMART1000RM1UN 1kVA Rack-mountable
Product TypeLine-interactive UPS

Product Specifications

General Information
ManufacturerTripp Lite by Eaton
Manufacturer Part NumberSMART1000RM1UN
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product LineSmartPro
Product ModelSMART1000RM1UN
Product NameSmartPro SMART1000RM1UN 1kVA Rack-mountable
Marketing InformationProtects Mission-Critical Rack-Mounted Equipment
  • Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
  • Audible alarm signals loss of utility power, overload and low battery
  • 6 NEMA 5-15R outlets
  • 10-ft. (3.05 m) power cord with 120V NEMA 5-15P input
  • 450-joule surge suppression rating
Reliable Battery Backup
  • Supports half load up to 14 min. and full load up to 4 min.
  • Internal batteries designed for hot-swap field replacement
Pre-Installed WEBCARDLX Network Interface
  • Allows full remote access for power monitoring, configuration, control and email notifications via secure web browser, SNMP, Telnet, SSH, and CLI.
  • Optional E2 sensors (sold separately) enable site monitoring of temperature, humidity and contact-closure status
Reduce Service Calls with Auto Probe Autonomous Device Management
  • Auto Probe feature (Firmware 15.5.2 and greater) of the LX Platform Interface checks the connectivity status of any networked device and automatically takes one or more user-configured actions if the device fails to respond; actions include outlet reboot, set SNMP traps, SNMP OID sets, and even script execution when used in conjunction with the Tripp Lite PowerAlert Network Shutdown Agent (PANSA)
Switchable Outlets
  • 2 load banks, each with one outlet controllable remotely to reboot equipment or shed nonessential loads
Automatic Voltage Regulation (AVR)
  • Maintains 120V nominal output over input range of 83V-147V without using battery power
EMI/RFI Line Noise Filtering
  • Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance
LED Indicators
  • Front-panel LEDs signal power, voltage correction, load level and battery charge state
Communications Ports
  • USB and DB9 ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software (available via free download at <li" class="redactor-autoparser-object">www.tripplite.com/poweralert)<... style="box-sizing: border-box; --pr-shadow:0 0 transparent; --pr-ring-inset:var(--pr-empty, ); --pr-ring-offset-width:0px; --pr-ring-offset-color:#fff; --pr-ring-color:rgba(59,130,246,0.5); --pr-ring-offset-shadow:0 0 transparent; --pr-ring-shadow:0 0 transparent; margin-bottom: 7px; break-inside: avoid; font-size: 0.85rem;">EPO port supports emergency shutdown in large facilities
Versatile Installation Options
  • Hardware included for mounting in 1U of EIA-standard 19 in. 2- or 4-post rack
  • Optional 4POSTRAILKIT1U accessory available for extra support in 4-post installations
  • Compatible with vertical mount cabinets
Product TypeLine-interactive UPS
Technical Information
Receptacle TypeNEMA 5-15R
Receptacle Detail6 x NEMA 5-15R
Power Description
Load Capacity1000 VA/800 W
Input Voltage120 V AC
Output Voltage120 V AC
Battery Information
Backup/Run Time (Full Load)4 Minute
Physical Characteristics
Height1.7"
Width17.5"
Depth16.8"
Rack Height1U
Form FactorRack-mountable
Weight (Approximate)32 lb
Miscellaneous
Package Contents
  • SmartPro SMART1000RM1UN 1kVA Rack-mountable
  • Mounting Hardware
  • Cabling for USB & DB9 Monitoring and EPO Switching
  • PowerAlert Unattended Shutdown and UPS/Power Monitoring Software
  • Instruction Manual
Environmentally FriendlyYes
Environmental CertificationRoHS
Country of OriginTaiwan
TAA CompliantYes
Warranty
Limited Warranty3 Year
Protects Mission-Critical Rack-Mounted Equipment
  • Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
  • Audible alarm signals loss of utility power, overload and low battery
  • 6 NEMA 5-15R outlets
  • 10-ft. (3.05 m) power cord with 120V NEMA 5-15P input
  • 450-joule surge suppression rating
Reliable Battery Backup
  • Supports half load up to 14 min. and full load up to 4 min.
  • Internal batteries designed for hot-swap field replacement
Pre-Installed WEBCARDLX Network Interface
  • Allows full remote access for power monitoring, configuration, control and email notifications via secure web browser, SNMP, Telnet, SSH, and CLI.
  • Optional E2 sensors (sold separately) enable site monitoring of temperature, humidity and contact-closure status
Reduce Service Calls with Auto Probe Autonomous Device Management
  • Auto Probe feature (Firmware 15.5.2 and greater) of the LX Platform Interface checks the connectivity status of any networked device and automatically takes one or more user-configured actions if the device fails to respond; actions include outlet reboot, set SNMP traps, SNMP OID sets, and even script execution when used in conjunction with the Tripp Lite PowerAlert Network Shutdown Agent (PANSA)
Switchable Outlets
  • 2 load banks, each with one outlet controllable remotely to reboot equipment or shed nonessential loads
Automatic Voltage Regulation (AVR)
  • Maintains 120V nominal output over input range of 83V-147V without using battery power
EMI/RFI Line Noise Filtering
  • Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance
LED Indicators
  • Front-panel LEDs signal power, voltage correction, load level and battery charge state
Communications Ports
  • USB and DB9 ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software (available via free download at <li" class="redactor-autoparser-object">www.tripplite.com/poweralert)<... style="box-sizing: border-box; --pr-shadow:0 0 transparent; --pr-ring-inset:var(--pr-empty, ); --pr-ring-offset-width:0px; --pr-ring-offset-color:#fff; --pr-ring-color:rgba(59,130,246,0.5); --pr-ring-offset-shadow:0 0 transparent; --pr-ring-shadow:0 0 transparent; margin-bottom: 7px; break-inside: avoid; font-size: 0.85rem;">EPO port supports emergency shutdown in large facilities
Versatile Installation Options
  • Hardware included for mounting in 1U of EIA-standard 19 in. 2- or 4-post rack
  • Optional 4POSTRAILKIT1U accessory available for extra support in 4-post installations
  • Compatible with vertical mount cabinets

Product Information

Transource eSKU1030217184
ManufacturerTripp Lite by Eaton
Manufacturer Part NumberSMART1000RM1UN
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product LineSmartPro
Product ModelSMART1000RM1UN
Product NameSmartPro SMART1000RM1UN 1kVA Rack-mountable
Product TypeLine-interactive UPS

Product Specifications

General Information
ManufacturerTripp Lite by Eaton
Manufacturer Part NumberSMART1000RM1UN
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product LineSmartPro
Product ModelSMART1000RM1UN
Product NameSmartPro SMART1000RM1UN 1kVA Rack-mountable
Marketing InformationProtects Mission-Critical Rack-Mounted Equipment
  • Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
  • Audible alarm signals loss of utility power, overload and low battery
  • 6 NEMA 5-15R outlets
  • 10-ft. (3.05 m) power cord with 120V NEMA 5-15P input
  • 450-joule surge suppression rating
Reliable Battery Backup
  • Supports half load up to 14 min. and full load up to 4 min.
  • Internal batteries designed for hot-swap field replacement
Pre-Installed WEBCARDLX Network Interface
  • Allows full remote access for power monitoring, configuration, control and email notifications via secure web browser, SNMP, Telnet, SSH, and CLI.
  • Optional E2 sensors (sold separately) enable site monitoring of temperature, humidity and contact-closure status
Reduce Service Calls with Auto Probe Autonomous Device Management
  • Auto Probe feature (Firmware 15.5.2 and greater) of the LX Platform Interface checks the connectivity status of any networked device and automatically takes one or more user-configured actions if the device fails to respond; actions include outlet reboot, set SNMP traps, SNMP OID sets, and even script execution when used in conjunction with the Tripp Lite PowerAlert Network Shutdown Agent (PANSA)
Switchable Outlets
  • 2 load banks, each with one outlet controllable remotely to reboot equipment or shed nonessential loads
Automatic Voltage Regulation (AVR)
  • Maintains 120V nominal output over input range of 83V-147V without using battery power
EMI/RFI Line Noise Filtering
  • Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance
LED Indicators
  • Front-panel LEDs signal power, voltage correction, load level and battery charge state
Communications Ports
  • USB and DB9 ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software (available via free download at <li" class="redactor-autoparser-object">www.tripplite.com/poweralert)<... style="box-sizing: border-box; --pr-shadow:0 0 transparent; --pr-ring-inset:var(--pr-empty, ); --pr-ring-offset-width:0px; --pr-ring-offset-color:#fff; --pr-ring-color:rgba(59,130,246,0.5); --pr-ring-offset-shadow:0 0 transparent; --pr-ring-shadow:0 0 transparent; margin-bottom: 7px; break-inside: avoid; font-size: 0.85rem;">EPO port supports emergency shutdown in large facilities
Versatile Installation Options
  • Hardware included for mounting in 1U of EIA-standard 19 in. 2- or 4-post rack
  • Optional 4POSTRAILKIT1U accessory available for extra support in 4-post installations
  • Compatible with vertical mount cabinets
Product TypeLine-interactive UPS
Technical Information
Receptacle TypeNEMA 5-15R
Receptacle Detail6 x NEMA 5-15R
Power Description
Load Capacity1000 VA/800 W
Input Voltage120 V AC
Output Voltage120 V AC
Battery Information
Backup/Run Time (Full Load)4 Minute
Physical Characteristics
Height1.7"
Width17.5"
Depth16.8"
Rack Height1U
Form FactorRack-mountable
Weight (Approximate)32 lb
Miscellaneous
Package Contents
  • SmartPro SMART1000RM1UN 1kVA Rack-mountable
  • Mounting Hardware
  • Cabling for USB & DB9 Monitoring and EPO Switching
  • PowerAlert Unattended Shutdown and UPS/Power Monitoring Software
  • Instruction Manual
Environmentally FriendlyYes
Environmental CertificationRoHS
Country of OriginTaiwan
TAA CompliantYes
Warranty
Limited Warranty3 Year